| EndClampSet1 |
|
Specially designed for DIY solar panel mounting.
For mounting 1 3/4 - 2" frame depth solar panels to the unistrut channel.
PRODUCT OVERVIEW
- For use in mounting solar panels to Unistrut or Superstrut.
- For panels having a frame height of 1.75 to 2". May work on thicker panels, but this has not been tested.
- End clamps. Will not slide or loosen.
- Heavy duty galvanized clamps are extremely weather resistant.
- Unique design -- as the bolt tightens, the clamp is forced into the rail with a spring action and against the panel at the same time.
|
|
This item consists of |
| 4) Unistrut/Superstruct compatible bottom lock washers, made of 1/4" 6061 aluminum. |
| 4) Stainless steel 1 1/2 hex head bolts. |
| 4) Stainless steel 1/4" hex nuts. |
| 4) Custom made 10 gauge solar end clamps. |
- Precision cut on our Waterjet cutter in Coleman Texas, U.S.A
Please note. The unistrut channel and solar panels shown in the photo(s) are not included, only the fasteners.
Perfect for DIY Solar racking!! |
| More Info. |
|
|
|
|
|
|
|
We verify orders.
|
|
In addition to standard credit card verification procedures which insure the credit card is not stolen, we also verify the computer IP address, phone numbers, etc., to ensure the person placing the order is not doing so for fraudulent purposes. We work with all applicable agencies to prevent and/or report fraudulent or suspicious activity.
|
|
|
